Call Us Freephone:

03335 77 66 55

Opening Hours:

Mon–Fri 9:00am to 5:00pm

TrustMark Consultation 2026

Installation Quality and Suitability

The right insulation, in the right property, installed correctly

Energy-efficiency improvements must begin with an assessment of the building itself. A measure that is appropriate for one property may be unsuitable for another, even where the buildings appear similar.

Cavity wall insulation is not simply a question of filling an empty space between two walls. The construction, condition and exposure of the property, together with the proposed insulation material and installation method, must all be considered.

An unsuitable or defective installation can undermine the very benefits the improvement was intended to deliver.

Understanding the building before recommending work

Before cavity wall insulation is installed, there should be adequate evidence that the property and proposed system are suitable.

Relevant considerations include:

A survey should not become a box-ticking exercise undertaken merely to authorise installation.

Non-traditional construction requires particular care

OSCAR regularly encounters enquiries involving properties that do not follow conventional masonry cavity-wall construction.

Examples include timber-framed properties, steel-framed buildings, concrete construction and prefabricated systems.

A conventional cavity wall insulation assessment cannot automatically be applied to these buildings.

In October 2026, OSCAR received two illustrative enquiries involving different forms of non-traditional construction.

Example A – Laing Easi-Form concrete construction

A homeowner reported cold walls and draughts in a property believed to have received retrofit cavity wall insulation during the 1980s. The reported construction was Laing Easi-Form, a non-traditional cast in-situ concrete system. The correct approach requires confirmation of the construction and whether any relevant insulation system and certification actually apply.

Example B – Post-war steel-framed construction

A homeowner sought advice concerning reportedly installed Foamalan insulation and possible extraction from a steel-framed property. In this situation, the assessment must distinguish between the condition of insulation and the condition of concealed structural steel. A cavity clearance certificate cannot, by itself, establish that concealed steel is free from corrosion or other structural defects. A specialist structural assessment may be necessary.

These are anonymised enquiries, not proof that defects were present or that the properties were unsuitable for every form of insulation.

Installation quality must be verifiable

Even where the property and material are suitable, the quality of installation matters.

Potential defects include incomplete fill, voids, slumping, excessive material loss, bridging, poorly managed obstructions and failures to follow the relevant installation specification.

OSCAR’s position is that a defective installation should not be treated as satisfactory simply because insulation material is present.

Equally, a decision to remove insulation should not be taken without an appropriate technical basis.

Repairing defective insulation

Where a system has failed, the remedy must be justified by the system design, certification, observed defects and the condition of the property.

It must not be assumed that voids, slumped insulation, wet material or an otherwise failed installation can simply be topped up.

OSCAR’s technical position is that there is no generic approved design for arbitrary topping-up or patch-repairing of a failed cavity insulation system.

Any proposed partial intervention would require its own valid technical justification and applicable system approval.

Where full removal is necessary, the work must be undertaken competently and independently verified.

OSCAR’s proposed improvements

  • Better property suitability assessments before installation.
  • Construction-specific competence and inspection methods.
  • Greater scrutiny of non-traditional properties.
  • Recorded evidence of cavity condition before work begins.
  • Traceable identification of the insulation system installed.
  • Independent investigation of disputed installation quality.
  • Remediation decisions based on technical evidence rather than commercial convenience.
  • Clear responsibility for defects discovered after installation.

A property should not have to suffer years of problems before the suitability or quality of its original installation is questioned.

Explore OSCAR’s TrustMark Consultation Response

This subject forms part of OSCAR Onsite Ltd’s wider response to the TrustMark consultation on strengthening consumer protection.

Back to all six topics

The views and recommendations expressed are those of OSCAR Onsite Ltd and should not be interpreted as decisions, endorsements or accepted proposals of TrustMark.

Explore other topics